Technical Supplement • November 18, 2026
The Onchain Collateral Report

Fiat On-Ramps, Bank Integrations & Direct Crypto Purchases

FIAT ON-RAMP & REVOLUT INTEGRATION // RESEARCH NOTE

Using ENS Usernames in Uniswap Wallet: A Security-Focused How-To Guide for 2026

Updated: 17 November 2026

ENS usernames in Uniswap Wallet let a self-custody wallet display, send to and receive at a human-readable name such as a .eth name instead of a long hexadecimal address. The feature is a convenience layer over the Ethereum Name Service, which stores the mapping between names and addresses in smart contracts on Ethereum. Because a name is only a pointer, the address behind it can be changed by its owner, so every transfer still needs verification before signing. This guide covers what the feature does, what to prepare, the steps involved, the costs, the available settings, and the failure modes that matter most to security-minded users.

What ENS usernames in Uniswap Wallet do and when they help

Names are pointers, not accounts

An ENS name is a human-readable identifier registered through the Ethereum Name Service and stored on Ethereum. Forward resolution maps a name to an address, while reverse resolution lets an address publish a name for display. Uniswap Wallet, like other self-custody wallets, reads those records so a name can be shown in the interface and accepted as a recipient. Funds never sit inside the name, and the keys remain with the user at all times.

Situations where the feature earns its place

Sending is the main case. Typing a short name is less error-prone than copying a long string of characters, and it gives the recipient a second reference point when confirming what arrived. Receiving is the second case, since a published name is easier to share publicly than a raw address.

A third case is verification. When a name appears in a confirmation screen and resolves to the address that was intended, the risk of a paste error or a clipboard hijack drops noticeably. The feature is less useful when the counterparty rotates addresses often, when the name is unregistered or expired, or when the transfer happens on a network where a different naming record is being read.

What you need before using ENS usernames in Uniswap Wallet

Prerequisites checklist

  • Uniswap Wallet installed on iOS or Android, or the Uniswap Extension for Chrome, with the recovery phrase written down and stored offline.
  • An ENS name that is registered and not expired, plus the address it should point to.
  • Enough ETH on Ethereum mainnet for any on-chain record updates, because ENS records live on Ethereum.
  • Clarity about the network for the transfer. Uniswap Labs products support Ethereum, Unichain, Arbitrum, Base, Optimism, Polygon, BNB Smart Chain, Avalanche, Celo, Linea, Monad, Soneium, World Chain, X Layer, ZKsync and Zora, while Solana swaps are available only in the web app.
  • The official documentation at support.uniswap.org within reach, since menu labels and their placement change between releases.

Registering or updating the name itself

Registration and record editing happen in the ENS manager, not inside the wallet. A name has to exist and resolve correctly before any wallet can display or use it. Registration and renewal carry a protocol fee payable in ETH, on top of network gas, and the amount depends on the name and on current conditions.

How to use ENS usernames in Uniswap Wallet: a step by step guide

Numbered walkthrough

  1. Open Uniswap Wallet and confirm which account is selected. A name can resolve to a different address than the one currently active.
  2. Check the network selector and make sure it matches the chain the transfer will use.
  3. For receiving, open the account view and copy the address. If a name is displayed, copy the address behind it rather than retyping the name by hand.
  4. For sending, open the send flow, paste the name into the recipient field, and let the resolution finish before touching anything else.
  5. Read the resolved address shown beneath the name. Compare it with the address the recipient supplied through a separate channel.
  6. Enter the amount and open the confirmation screen. Confirm that the name, address, network and token all agree.
  7. If the wallet displays a warning about the token, the contract or the network, treat the transaction as unsafe until the warning is understood.
  8. Approve the transaction and pay network gas. On supported networks, UniswapX can fill an order without the user paying gas.
  9. Save the counterparty as a contact holding both the name and the raw address, so later transfers do not rely on memory.

Setting a primary name for display

Reverse resolution, often called a primary name, is what makes a wallet show a name instead of an address. It is configured on Ethereum mainnet and costs gas. A primary name is a display convenience, not proof that the account behind it is trustworthy or that its owner is who the name suggests.

Costs and fees involved with ENS usernames in Uniswap Wallet

Where the money goes

In 2026 Uniswap Labs charges 0% interface fees on the web app and on Uniswap Wallet, so the wallet adds nothing for resolving or displaying a name. Users still pay network gas, and swaps pay the pool fee, which on v2, v3 and v4 is determined by the fee tier of the pool in use. Version 3 introduced concentrated liquidity with tiers of 0.01%, 0.05%, 0.3% and 1%.

ENS registration and renewal fees are set by the ENS protocol and paid in ETH, entirely separate from anything Uniswap charges. Editing records, setting a primary name or transferring a name are on-chain actions that consume gas on Ethereum. Card purchases and sales to a bank run through third-party payment partners and depend on region, with their own pricing and limits.

Why gas matters more for names than for swaps

Reading a record is free, but changing one is a transaction. When Ethereum gas is expensive, a single record update can cost more than the name itself. Grouping several record changes into one transaction is the usual way to keep that cost down.

ENS usernames in Uniswap Wallet: options and settings explained

Table of settings and what each one means

Option or setting Where it appears What it means What to verify
Primary name (reverse resolution) Account header or profile area The name an address publishes for display That it points to an address still under your control
Name support in the recipient field Send and swap flows Accepts a name and resolves it to an address The resolved address, before signing anything
Saved contacts Address book or contact list A local label stored on the device That the stored address still matches the name
Forward and reverse records ENS manager, outside the wallet Forward maps name to address, reverse maps address to name That both directions agree with each other
Network selector Top of the main screen Chooses which chain the transaction runs on That the chain matches the intended transfer
Transaction confirmation details Final signing screen Shows name, address, amount and network together Every field, since this is the last checkpoint

Settings differ slightly between Uniswap Wallet for iOS and Android, the Chrome extension and the web app at app.uniswap.org. Labels move, and the confirmation screen is the only place where all parameters appear side by side.

Limits and failure modes of ENS usernames in Uniswap Wallet

Known failure modes

A name can be re-pointed to a new address by whoever controls it, which is why an old screenshot proves nothing. Names expire, and once a name lapses it can be registered by someone else and pointed anywhere, so an expired name is a hazard rather than a shortcut. Resolution also depends on the network being read: a record that is correct on Ethereum mainnet may not be the record an interface consults when the transaction is set to run elsewhere.

Uniswap keeps a list of unsupported tokens that cannot be swapped in its products, and a name does not change that. A name also does not bypass slippage settings, price impact warnings or approval prompts, since those belong to the swap itself rather than to the recipient.

What the wallet cannot protect against

A self-custody wallet cannot reverse a confirmed transaction, and Uniswap is a non-custodial protocol where swaps execute through smart contracts and liquidity pools. If funds go to the wrong address, the protocol has no mechanism to return them. A wallet can warn, display and resolve, but it cannot validate intent. That responsibility stays with the person signing.

Practical tips for security-minded ENS username use

Habits worth keeping

  • Treat the resolved address, not the name, as the destination.
  • Confirm the receiving address through a second channel, ideally a channel the name owner does not control.
  • Keep a written record of which name points to which address, and the date it was checked.
  • Prefer test transfers of a small amount when sending to a name for the first time.
  • Check renewal dates well before they pass, since an expired name is a race.

When to slow down

Slow down when a name has just changed hands, when a confirmation screen shows a mismatch between name and address, or when a counterparty pushes for speed. Speed is a pressure tactic in most address-swap scams. Verifying an address takes seconds, and a mistaken transfer on a public chain is permanent.

FAQ

Are ENS usernames in Uniswap Wallet the same as a Uniswap account?

No. Uniswap is a non-custodial protocol with no account system holding user funds, and ENS names are records on Ethereum managed by the Ethereum Name Service. A name identifies an address; it does not create a login or a custodial balance.

Can a name be pointed at a different address after it has been shared?

Yes, if its owner updates the record. That is the central risk of relying on a name alone. Verification should compare the name and the address at the moment of the transaction, not at the moment the name was first seen.

Does resolving a name cost anything in Uniswap Wallet?

Reading a record is free and the wallet applies no interface fee in 2026. Costs appear when a record is written on chain, when a swap pays the pool fee, and when network gas is required for the transaction itself.

What happens when an ENS name expires?

It stops resolving in most interfaces, and after the grace period it can be registered by anyone. Renewal happens in the ENS manager, not in the wallet. Any record that pointed to your address becomes unreliable the moment the name lapses.

Can names be used on Unichain and other supported networks?

ENS records are stored on Ethereum, so that is where resolution is normally read from. Behavior on Layer 2 networks and other chains varies by interface and by how the record is published. support.uniswap.org documents current behavior per network.

← Return to Main Article